LS Industrial Systems G3L-RUEA - Communication Module Flag Application; Flag Type; Imprtant Flag Used in the Rnet

Chapter 6. Communication Function
6-37
6. 4 Communicaion module flag application
6.4.1 Flag type
1) Flag that checks whether communication with other station is normal or not
(1) _NETx_LIV[n] (range n = 0~63: other station no.)
It indicates that other station power is on and data TRX is normal through the communication
cable.
(2) _NETx_RST[n]
It indicates information about power recovery. It will be on if power is recoved from power-cut or
cable-cut.
6.4.2 Imprtant flag used in the Rnet
Type Data type Access allowance Reference
_NETx_LIV[n]
(range n = 0 ~ 63)
USINT
Read only
_NETx_RST[n]
(range n = 0 ~ 63)
USINT Read/write
FSM
FMM
Common flag
‘x’ used in the flag indicates the slot no. where communication module is equipped.
(Range 0~7)
Note