LS Industrial Systems G3L-RUEA - Error Code E03-03: Run Link Contact of High Speed Link Not on

Chapter 9. Trouble Shooting
9-11
9.2.9 Error code E03-03: Run link contact of high speed link not ON
Is high speed link
of each station operating
well?
Run link of high speed link is not operating.
Yes
No
Is network configuration
perfect?
Change the mode of each station
to Run mode.
I
s
li
n
k
-ena
bl
e o
f
eac
h
station set to ‘On’?
No
Is CPU operation mode of
each station set to Run
mode?
Set appropriate link-enable to ‘On’
for link-enable setting of each
station.
Download parameter again.
Check and correct it according
to the flow of error code E01-
01.
Yes
End
Yes
Yes
Perform troubleshooting
according to error code E03-02
for each station.
No
Is station
number setting of each
registration item
correct?
Correct station number setting by
referring to the function
description of high speed link in
6.2.
Is there
any error of other station
among registration
items?
Set link enable setting to ‘On’.
Yes
No
Remove the error of other
station.
Yes
No
No