LS Industrial Systems SV iC5 Series User Manual

5. Programming keypad
5-8
SV-iC5
When changing run frequency to 30.05 Hz in Drive group
Drive group
1 -. In “0.0”, press the Prog/Ent () key once.
2
-. The second 0 in 0.0 is active.
-. Press the Right () key once to move the cursor to the right.
3
-. 0.00 is displayed
-. Press the Up () key until 5 is displayed.
4 -. Press the Left (⊳) key once.
5
-. The middle digit in 0.05 is active.
-. Press the Left (⊳) key once.
6 -. Press the Left (⊳) key once.
7
-. 00.0 is displayed with the first 0 active, but the actual value 0.05 remains unchanged.
-. Press the Up () key to set to 3.
8
-. Press the Prog/Ent () key once.
-. 30.0 is blinking.
-. Press the Prog/Ent () key once.
9 -. Run frequency is set to 30.0 when the blinking stops.
♣
♣♣
♣ Three digit LED display is provided in SV-iC5 Series. However, digit expansion is available using the
Left(⊳
⊳⊳
⊳)/Right(

) key for parameter setting and monitoring.
♣
♣♣
♣ In step 8, pressing the Left (⊳) or Right () key while 30.0 is blinking will disable the setting.

LS Industrial Systems SV iC5 Series Specifications

General

Brand	LS Industrial Systems
Model	SV iC5 Series
Category	Inverter
Language	English