LS Industrial Systems SV iC5 Series User Manual

1. Basic information & precautions
1-3
SV-iC5
1.3 Removal and reinstallation
1.3.1 Removal of the front cover
 To change parameter setting: Press the pattern with a finger slightly as 1) and
push it downward as 2). Then 4-way button will appear. Use this button for
parameter setting and changing the value.
 Removal for wiring: The method is the same as shown in 1. Hold both sides of the
cover and lift upward to completely remove from the main body.
1. Push down
the cover until
cover top
matches the
side slot.
1)
2)
1)
2)
1. Press here gently
2. Push it down
4-Way Button
3. Lift it up to
remove.
2. Hold both
sides of this
part
Parallel!
Side slot

LS Industrial Systems SV iC5 Series Specifications

General

Brand	LS Industrial Systems
Model	SV iC5 Series
Category	Inverter
Language	English