5 -22
(4) Replacing Air cleaner element
(Dry type)
z Remove the cover and pull out the primary filter
element straight out.
z Clean the inside of the air cleaner housing using
a clean damp cloth.
z Check if there is damage inside filter element by
using a light. If there is tiny crack or small hole in
the filter element or the gasket is damaged,
replace it with a new one.
z Insert the filter element by pushing it deeply into
the filter housing.
z Remove the dust of the evacuator valve and
clean the inside of the cover.
z Assemble the cover with the evacuator valve
placed downward.
▶ Do not start the engine or close the hood if the filter element is not assembled..
Notice
Cover
Primary filter
element
Evacuator
valve