EasyManua.ls Logo

LS tractor MT125 - Seat Belt and Safety Device Usage

LS tractor MT125
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 -4
(5) Exiting the tractor
z Whenever possible, use the left-hand side step
for entering/exiting.
z When exiting the tractor, use the step, steering
wheel and grab handle on the left fender.
z In an emergency state, you can use the right-
hand side step for exiting.
z Do not jump up/down for your safety.
z Stop the engine and remove the ignition key
before leaving tractor.
Grab handle
Do not press the control pedals when entering/exiting the driver’s seat.
Do not grasp the gear levers when entering/exiting the driver’s seat.
Caution
(4) Seat belt
z Always wear the seat belt before operating the
tractor and adjust the belt to fit the operator.
1. Insert the seat belt end into the buckle until a
‘click’ indicates it is properly engaged.
2. To remove the seat belt from the buckle,
press the red release button on the buckle.
z Check the seat belt regularly. If damaged or
frayed, replace it with a new one.
Warning
If not wearing the seat belt, it may cause serious injury in case of accident.
During operation, it must be required to wear seat belt with a cab or safety frame
installed. After wearing the seat belt, adjust the belt to fit the operator.
If safety frame is folded down for frame model, do not wear the seat belt.
Buckle
Seat belt
Steering wheel
Step
Grab handle

Table of Contents

Related product manuals