5 -24
(1) Replacement of Engine Coolant
Warning
▶When opening the radiator cap, be careful of the escaping hot water or steam.
▶Cool down the coolant sufficiently before opening.
③ Replacing coolant
z The drain cock must be loosened only when the
engine is cooled down.
z Loosen the radiator cock under the radiator and
drain plug installed on engine block to drain the
coolant in the engine and radiator.
z Before supplying the coolant, wash out the
radiator with clean water 2~3 times.
z Apply the overflow tube and supply the coolant up
to the inlet of radiator. Fill up the expansion tank
with coolant above the MIN mark. Change the
coolant with anti-freeze solution in cold weather.
Radiator cap
z Anti-freeze solution is filled up from the factory.
After first winter, change the coolant to remove
the foreign materials.
5-11. Every 2000 hour or 2-year check
① Capacity : See section 5-3, “Lubricants and
Capacity” or the last page in this manual.
② Check
z Check the coolant of radiator and expansion
tank whether it is insufficient or not.
z Do not open the radiator cap except to check or
change it.
z Supply the clean soft water to the coolant. If not,
the radiator shall be corroded or rust shall be
generated.
Radiator cock
Coolant drain plug
To Next Page
Loading...
Need help?
General
