3 -8
▶ Set the engine speed over 1500 rev/min for stability of hydraulic system while
driving or working.
Notice
(9) Throttle lever
z It is used to set or change the engine speed.
Low speed : Pull It backward
High speed : Push it forward.
z When using the throttle pedal, the throttle lever
must be placed on LOW speed.
Throttle lever
(10) HST forward / reverse pedal
(HST type)
z Press the HST pedal forward to drive tractor
forward.
z Remove foot from the pedal to stop the tractor.
As the pedal returns to neutral, the tractor shall
be stopped.
z The tractor speed is depending on the HST
pedal displacement.
z When reversing the tractor, press the HST
reverse pedal.
warning
▶ Press the brake pedal to stop the tractor at high speed. Even if the HST pedal(s)
become to be neutral, it takes long distance to stop the tractor at high speed.
▶ Do not suddenly press/release the HST pedal(s) to avoid the impact of the
start/stop.
HST forward pedal
HST reverse pedal
Caution
▶ To prevent serious damage to the HST unit, do not arbitrary adjust the stopper
bolts related to the HST pedal stroke and linkage system.
To Next Page
Loading...
