6 -3
MT122 MT125
PTO
Type Independent rear PTO / MID PTO
No. of speed 1- speed gear
PTO / Engine
540 rev/min / 2933 rev/min (Rear PTO)
2500 rev/min / 2841 rev/min (MID. PTO)
HYDRAULICLIFT
3 Point linkage CAT1
Draft load detection N/A
Lowering speed control
& fixing device
Down speed control valve
Pump Gear pump type, Transmission drive
Rated flow 25LPM (6.6 GPM)
System pressure 13.0~13.5 MPa (1885~1958 psi)
Lift
capacity
Lower link end 450 kgf (992 lbf)
24˝ behind lift
point
330 kgf (728 lbf)
REMOTE
CONTROL
Type Double acting (Spring return type)
No. of Q/coupler 2EA (optional)
F/Loader coupler Front loader valve, 4EA (optional)
STEERING SYSTEM
Type Hydrostatic
Oil Transmission oil (common use)
Min. turning radius
(without brake)
2400 mm (7.87 ft)
Max. steering angle 54.5˚
No. of steering turns 3.3 turns (lock to lock)
Rated flow 8LPM (1.1 GPM)
System pressure 8.5~9.0 MPa (1233~1305 psi)
To Next Page
Loading...
