Channel
BPD17 pH / Redox Monitor
Operating Guide
- 31 -
Input Filtering (Averaging)
When very noisy environments are encountered, this
function will allow the user to filter the sensor
readings by taking a running average over the time
period selected (from 10 seconds to 5 minutes).
/ – Select Option
EXIT
– Cancel
– Save Selection
Simulate Sensor
To help in commissioning of the instrument the user
can use this menu to manually set the sensor reading
and so test the operation of the setpoints and current
output.
/ – Increase / Decrease Digit
– Select Next Digit
EXIT
– Cancel
SET
– Use Entered Value
To Next Page
Loading...
