Calibration
- 36 -
BPD17 pH / Redox Monitor
Operating Guide
pH Buffer (Offset) Calibration
Enter the pH Manual Offset Calibration Routine
Only available when calibration principle is set to
manual.
See page 43 for more details.
/ – Select Option
EXIT
– Return to Main Menu
– Enter Option
Offset Value
Displays the electrode Offset currently being used by
the instrument. Only available when units set to pH
in the channel setup menu.
Cannot be edited.
Changed by either using the pH manual offset
calibration, or by the pH auto calibration.
pH Slope Calibration
Enter the pH Manual Slope Calibration Routine
Only available when calibration principle is set to
manual.
See page 43 for more details.
/ – Select Option
EXIT
– Return to Main Menu
– Enter Option
Slope Value
Displays the electrode Slope currently being used by
the instrument. Only available when units set to pH
in the channel setup menu.
Cannot be edited.
Changed by either using the pH manual slope
calibration, or by the pH auto calibration.
To Next Page
Loading...
