Setpoints
- 50 -
BPD17 pH / Redox Monitor
Operating Guide
Initial Charge
This allows the user to have a onetime over-ride of
the Dose Alarm to use for example when filling a tank
for the first time.
The user enters a charge time and then initiates the
charge time. The instrument will then disable the
dose alarm until either the relay becomes inactive
because the setpoint has been reached or the charge
timer reaches zero in which event the instrument will
automatically display enter a Dose Alarm state.
/ – Select Option
EXIT
– Cancel
– Save Selection
Charge Time
Sets the initial charge time.
/ – Increase / Decrease Digit
– Select Next Digit
EXIT
– Cancel
– Save Value
Charge Access
Enabling this allows the user to initialise the initial
charge by means of a button on the front screen.
/ – Select Option
EXIT
– Cancel
– Save Selection
Start Initial Charge
The user can also start the initial charge via this
option in the setpoint menu.
/ – Select Option
EXIT
– Cancel
– Save Selection
To Next Page
Loading...
