Lucent Technologies Galaxy Power System 4812
Issue 5 June 2000 Rectifiers 4 - 1
4 Rectifiers
596A
Overview The 596A 50-ampere rectifier operates from single-phase ac service
with a phase-to-phase voltage within the range of 176-264Vac.
The rectifiers are shipped separately from the cabinets for quick and
straightforward installation into rectifier shelves at the site.
Interconnections to ac input, dc output, and control signals occur
automatically during insertion. The rectifier is keyed to prevent
installation of the wrong rectifier. No settings or adjustments to
potentiometers are necessary. The installer must set the rectifier’s ID
using the ON/STBY switch to allow the controller to learn the rectifier’s
physical location.
The 596A rectifier is UL Recognized for both the U. S. and Canada,
complies with UL1950 (Information Technology Equipment), and
meets EN60950 requirements.
To Next Page
Loading...
Need help?
General
