Lucent Technologies Galaxy Power System 4812 - Illustrations; BLJ and BIC Locations; Replacing a BIC; Figure 8-1: Location of BLJ Terminal Board and Bay Interface Card

Lucent Technologies Galaxy Power System 4812
Issue 5 June 2000 Circuit Boards 8 - 3
Illustrations
BLJ and BIC
Locations
Figure 8-1 shows the location of the BLJ Terminal Board and Bay
Interface Card (BIC).
Replacing a BIC Figure 8-2 shows the straps required prior to replacing a Bay Interface
Card (BIC). (See “BIC Failure” in Table 13-C.) Straps are backups to
ensure continous operation of LVBD and LVLD contactors.
Figure 8-1: Location of BLJ Terminal Board and
Bay Interface Card
BLJ BIC
Figure 8-2: Required Straps Prior to Replacing
a Bay Interface Card (BIC)
BLJ2/3
Straps For Replacing BIC Board