Lucent Technologies SLC-2000 Access System Central Office Terminal User Manual

SLC
®
-2000 Access System
COT Frame Assembly Manual
Issue 4 February 1997 xiii
Lucent Technologies
363-208-011
About This Manual
Purpose
This manual provides installation instructions for the SLC

-2000 Access System
Central Office Terminal (COT) Frame for end users responsible for their own
equipment assembly, mounting, assembly, and connections of the COT System.
It can also be used as a troubleshooting guide for installation wiring problems.
Refer to Lucent Technologies 363-208-001 SLC -2000 Access System User/
Service Manual for any activity involving system turn-up, circuit turn-up,
maintenance, or trouble analysis.
Scope
This document is intended to enable installation personnel to install the COT
Frame equipment without the use or reference to any documents other than job
drawings and specifications. Only the SLC -2000 COT Frame Assembly
installation instructions are covered herein. Refer to other appropriate Lucent
Technologies Practices for installation instructions of RT frames or cabinets.
Intended Audiences
This installation manual is for SLC -2000 Access System customers, who
maintain their own installation organization, to install equipment.
This manual is intended ONLY for the installation of the 7-foot COT Frame in
central office environments; and for preliminary tests performed prior to turnover
tests by central office terminal testing personnel.

Lucent Technologies SLC-2000 Access System Central Office Terminal Specifications

General

Brand	Lucent Technologies
Model	SLC-2000 Access System Central Office Terminal
Category	Touch terminals
Language	English