363-208-011
About This Manual
Issue 4 February 1997 xv
■ Chapter 5, Parts Description
This chapter describes the requirements and construction of connec-
tors, cables, and assemblies.
■ Applications
This chapter includes interconnect figures for troubleshooting and com-
prehensive overview relating to system interconnections. The applica-
tion schematic drawing is also included.
■ Supplementary Information
This chapter (AT&T Practice 065-215-250) includes detailed framework
information and floor layout and drilling procedures which may be used
as a reference to supplement local practices.
Safety Instructions
Admonishments
This manual may contain admonishments in the form of DANGERS, WARNINGS,
and CAUTIONS. These admonishments, listed in order of priority, have the
following definitions:
■ Danger indicates the presence of a hazard that will cause death or
severe personal injury if the hazard is not avoided.
■ Warning indicates the presence of a hazard that can cause death or
severe personal injury if the hazard is not avoided.
■ Caution indicates the presence of a hazard that will or can cause
minor personal injury or property damage if the hazard is not avoided.
Caution is also used for property-damage-only accidents. This includes
equipment damage, loss of software, or service interruption.