363-208-011
Parts Description
Issue 4 February 1997 5-5
Cable Assemblies
The major cable assemblies furnished as dangler cables on the ARM, ATU, and
MDS are attached to those shelves by the manufacturer. The following cable
assemblies which interface with the customer’s cables and are not detailed in the
CABLING, WIRING, AND ASSEMBLY section are detailed here for installation
troubleshooting purposes.
Refer to the following figures for wiring details. All pieces are shipped with the
shelves, but some parts (*) may be loosely attached or shipped in separate
containers.
ED7C723-30 Group 7 TAP to ARM backplane interface
ED7C723-30 Group 9()-12() PCM Distribution to MDS dangler cable
ED7C723-32 Group 10 TAP to MDS backplane interface
ED7C723-32 Group 11() PCM Distribution to MDS backplane interface
ED7C723-34 Group 1 TAP to ARM/MDS dangler
ED7C723-36 Group 3() ATU to ARM
ED7C723-36 Group 4 ATU to ARM
ED7C723-36 Group 5 ATU to PGTC interface
To Next Page
Loading...
Need help?
General
