363-208-011 Appendix 2
NE00676-70 Local Alarm Relay Unit Installation Procedure
Issue 1.0 August 1998 3
Rating (LARU and UIP):
MEDIUM Since the installation of the UIP may impact transmission this procedure
has a MEDIUM procedural risk rating, since there is a potential for a
service interruption to the end customer, if any procedural deviations or
procedure specific equipment failures occur during the procedure.
Equipment
Equipment List
The following equipment, apparatus, and tools are required to perform this
Modification Implementation Procedure.
NOTES:
I = This item may be ordered from Lucent Technologies-IMDARC by the
installer.
R = This item is required for installation of and is packaged with the DPFU.
Code Qty Note Description
6018691341 1 Local Alarm Relay Unit Kit
NE00676-70, G1 1 R Local Alarm Relay Unit
848137972 1 R Mounting Plate e/ w 6-32 nuts and
lockwashers (3 each)
NE00676-30 G1 1 R Cable Assembly, Power
NE00676-30 G2 1 R Cable Assembly, Alarm
1 R AMP Header (P253/J253)
1 R MIP 363-208-500 (Instructions)
1 I Volt-Ohmmeter
To Next Page
Loading...