ND30-09D 53 User's manual
4031 RW
0,1
Alarm output 1 - State of the relay at the alarm
switched on: 0 - relay disabled
1 - relay enabled
1
4032 RW
0,1
Alarm output 1 - alarm deactivation lock 0
4033 RW
0,1
Alarm output 1 - alarm signalization 0
4034 RW 0.1..43
Alarm output 1 - value for the condition 1 (c1)
(code as in Table 8)
38
4035 RW 0..9
Alarm output 1 - type for the condition 1: 0 –
n_on, 1 – noFF,
2 – on, 3 – oFF, 4 – H_on, 5 – HoFF, 6 – 3non, 7
– 3noF,
8 – 3_on, 9 – 3_oF
0
4036 RW
-1440..
0..1440
[
o
/
oo
]
Alarm output 1 - lower value of the condition 1
switch of the rated input range
900
4037 RW
-1440..
0..1440
[
o
/
oo
]
Alarm output 1 - upper value of the condition 1
switch of the rated input range
1100
4038 RW 0..3600 s Alarm output 1 - condition 1 activation delay 0
4039 RW 0..3600 s Alarm output 1 - condition 1 deactivation delay 0
4040 RW 0..3600 s Alarm output 1 - condition 1 re-activation lock 0
4041 RW
0,1
Alarm output 1 - condition 1 signalization 0
4042 RW reserved
4043 RW 0.1..43
Alarm output 1 - value for the condition 2 (c2)
(code as in Table 8)
38
4044 RW 0..9
Alarm output 1 - type for the condition 2: 0 –
n_on, 1 – noFF,
2 – on, 3 – oFF, 4 – H_on, 5 – HoFF, 6 – 3non, 7
– 3noF,
8 – 3_on, 9 – 3_oF
0
4045 RW
-1440..
0..1440
[
o
/
oo
]
Alarm output 1 - lower value of the condition 2
switch of the rated input range
900
4046 RW
-1440..
0..1440
[
o
/
oo
]
Alarm output 1 - upper value of the condition 2
switch of the rated input range
1100
4047 RW 0..3600 s Alarm output 1 - condition 2 activation delay 0
4048 RW 0..3600 s Alarm output 1 - condition 2 deactivation delay 0
4049 RW 0..3600 s Alarm output 1 - condition 2 re-activation lock 0
4050 RW
0,1
Alarm output 1– condition 2 signalization 0
4051 RW reserved
4052 RW 0.1..43
Alarm output 1 - value for the condition 3 (c3)
(code as in Table 8)
38
4053 RW 0..9
Alarm output 1 - type for the condition 3: 0 – n_on,
1 – noFF, 2– on, 3 – oFF, 4 – H_on, 5 – HoFF, 6 –
3non, 7 – 3noF, 8 – 3_on, 9– 3_oF
0
To Next Page
Loading...
Need help?
General
