1. Disconnect the AC Power cords on this unit
TV and other devices from the AC outlet.
2. Make the Connections as illustrated below.
3.
fter making all the Connections, connect the AC Power cords on the devices.
ntenna Connection (Required)
Do not use a tightening tool when connecting a F-type Coaxial Cable connector to this unit
If the Coaxial Cable is connected too tightly using a tightening tool, the Antenna input Jack may be damaged
or your safety and to avoid damage to the device, please unplug the RF Coaxial Cable from the ANTENNA IN / OUT jack
before moving the unit
utdoor or attic Antennas will be more effective than Set-top indoor versions
HDD / External HDD Playback through the RF is not supported
■
Supplied Cables used in this Connection are as follows
lease purchase the rest of the necessary Cables at your local store
EN.indd14 2015/09/0219:00:29