elect this if your Wireless Networks has a PBC button
*
a wireless Connection. If it fails, tr
PBC (Push Button Configuration) button may be called at
our Router's given name. Refer to the Router's Manual fo
If it continuously fails, then refer to the Router’s Manual fo
4
Select “Easy Connect” using
5
Select “Push Button Method” using
ress the PBC button on your Wireless
etwork Connection will automatically be established
hen Connection test will Start and the test result will
ure the wireless Network usin
4
Select “PIN Code Method” using
5
Select an access Point to which you wish to
connect t
onfirm the 8-digit PIN Code Displayed On-screen
enter the 8-digit PIN Code in it.
please refer to its Owner's Manual
etwork Connection will automatically be established
hen Connection test will Start and the test result will
up.
Displaying Network Status
ou can check the Network Status
, then Select “Settings”
“General Settings” “Network”, then press
2
Select “Displaying Network Status”, then
press
List of Network information will be Displayed
elect “Return”, then press
st
of wireless Network information will be Displayed
”, List of Network information
w
EN.indd46 2015/09/0219:01:01