Mahr Digimar 817 CLT - Conical Measuring Anvils; Accessories for Perpendicularity Measurements; Depth Probe

Mahr GmbH, Digimar 817 CLT
30
5.6.6 Conical measuring anvils
Order no. Description Type Holder Suitable for
4429228 Conical measuring anvil MKe30 ø6mm Carrier817h1/-h2
3015920 Conical measuring anvil MKe8 M3 Holder Gk/8
5.6.7 Accessories for perpendicularity measurements
Order no. Description Type Holder Suitable for
4429206 Holder for
perpendicularity
measurement
817h3 ø8mm Dial comparators and dial
indicators
4429610 Data connection cable DK-M1 2000W/2001W
4346700 Digital dial comparator
0.00001mm / ± 2mm
2000W ø8mm -
4346800 Digital dial comparator
0.00001mm / ± 2mm
2001W ø8mm -
5.6.8 Depth probe
Order no. Description Type Holder Suitable for
4429221 Depth probe TMT120 ø6mm –
4429421 Depth probe, pivotable TMT120S ø6mm –
3015918 Probe shoe,
d=0.5mm, l=78mm
TS0.5/78 ø4mm Holder Gk/8
3015919 Stylus/stylus tip,
d=1.2mm, l=75mm,
ls=15.5mm
T1.2/75 ø4mm Holder Gk/8
4429256 Probe holder incl.
measuring anvil
ø2.0mm
KM2 M2 Carrier817h1/h2