Mahr Digimar 817 CLT User Manual

Mahr GmbH, Digimar 817 CLT
5
Table of contents
Permitted uses ..................................1
Reasonably foreseeable misuse ......... 1
Disposal ............................................. 2
Safety instructions ............................. 3
1 General information ..................... 6
1.1 Scope of delivery....................................6
1.2 Assembly and setup ..............................7
2 Elements of the measuring
instrument ................................. 10
2.1 On/off switch ..................................... 10
2.2 Control panel ....................................... 10
2.3 Measuring slide ................................... 11
2.4 Carrier for measuring anvils .............. 11
2.5 Quick measurement function keys .... 11
2.6 Thumbwheel ........................................ 12
2.7 Button for air bearing .......................... 12
2.8 Ports .................................................... 13
3 User interface of the Digimar
software .................................... 14
3.1 Status bar ............................................ 14
3.2 Menu bar ............................................. 14
3.3 Information area ................................. 15
3.4 Function key bar .................................. 15
4 Commissioning ......................... 19
4.1 Initial commissioning ......................... 19
4.1.1 Switching ON .......................... 19
4.1.2 Basic settings .......................... 19
4.2 Reference point run ............................ 20
4.3 Calibrate the probe ............................ 20
4.4 Zero point on the measuring plate..... 21
4.5 Workpiece zero point .......................... 21
4.6 Zero point offset ................................. 21
4.7 Measuring methods ............................ 22
4.7.1 Basic measuring functions .... 22
4.7.2 2D mode ................................. 22
4.7.3 Quick mode ............................. 23
4.7.4 Measuring program mode ...... 24
4.7.5 Measuring results ................... 24
5 Annex ........................................ 25
5.1 Maintenance and care ........................ 25
5.2 Cleaning the instrument ..................... 25
5.3 Charging the battery .......................... 25
5.4 Technical data ..................................... 26
5.5 Device information .............................. 27
5.6 Accessories ......................................... 28
5.6.1 Carriers and holders for
measuring anvils ..................... 28
5.6.2 Measuring anvils ..................... 28
5.6.3 Spherical probe ....................... 29
5.6.4 Spherical anvils ....................... 29
5.6.5 Disc and cylindrical measuring
anvils ........................................ 29
5.6.6 Conical measuring anvils ....... 30
5.6.7 Accessories for perpendicularity
measurements ........................ 30
5.6.8 Depth probe ............................. 30
5.6.9 Other accessories ................... 31
6 Alphabetical index ..................... 32

Mahr Digimar 817 CLT Specifications

General

Brand	Mahr
Model	Digimar 817 CLT
Category	Measuring Instruments
Language	English