EasyManua.ls Logo

Man D 2842 LE 620 - Removing and installing the oil cooler; Oil Cooler Removal Steps

Man D 2842 LE 620
180 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
2
3
Changing oil filter
53
Caution:
Used oil and oil filters are classed as dan-
gerous waste and must de disposed of
accordingly. Note instructions for prevent-
ing environmental damage.
Fig. 1
Open oil drain plug on oil filter can and use con-
tainer to catch oil that may emerge.
Danger:
Oil filter can and oil filter are filled with hot
oil.
Risk of burns and scalding.
Fig. 2
Remove mounting bolt of filter bowl.
Take off filter bowl and clean it internally.
Fig. 3
Insert new filter element and fit filter bowl with new
seals.
Refit oil drain plug with new seal.
Observe tightening torque for mounting bolt.
Note:
To prevent the seal from twisting hold the
filter bowl firmly when tightening the ten-
sioning screw.
Top up with engine oil, let engine run briefly and
then check for leaks.
Check oil level.

Table of Contents

Related product manuals