Manitou MC 18-2 D K ST5 S1 - Page 48

C - REV COUNTER
10-level LED display from 0 to 3,500rpm

IMPORTANT

The red zone from 3,000 to 3,500rpm must be avoided at the risk of damaging the engine.
D - MULTIFUNCTION SCREEN NAVIGATION
MENU SCROLL BUTTON
NOTE: By default, when the lift truck is started, the screen displays the last selection made by the operator.
• 1 - Hour meter (h)
• 2 - Rev counter (rpm)
• 3 - Current fuel consumption (l/h)
• 4 - Forward/reverse -> Rev counter (rpm)
- Neutral -> Hour meter (h)
1 2 3 4
VALIDATION, MAINTENANCE, ERROR CODES AND RESET BUTTON
• 1 - Menu selected by the operator displayed
NO ERROR CODE
• 2 a - Time to 500H maintenance (h)
- To reset this maintenance, carry out the 500-hour maintenance (3-MAINTENANCE).
• 3 a - Time to stationary regeneration of the particle filter (h)
- To reset this regeneration, carry out the occasional maintenance (3-MAINTENANCE).
• 4 a - No error
WITH ERROR CODE(S)
• 2 b - Error (scroll through error codes in a loop or press
)
- Before contacting your dealer, check the fuses.

IMPORTANT

In order to resolve the problems with the lift truck, communicate the error code(s) to your dealer.
• 3 b - Time to 500H maintenance (h)
- To reset this maintenance, carry out the 500-hour maintenance (3-MAINTENANCE).
• 4 b - Time to stationary regeneration of the particle filter (h)
- To reset this regeneration, carry out the occasional maintenance (3-MAINTENANCE).
NOTE: the countdown from 700 hours to 301 hours is displayed as "dpf - - -", and from 300 hours to 0 hours the actual time
is displayed.
3 ‘’
3 ‘’
3 ‘’
3 ‘’ 3 ‘’
3 ‘’ 3 ‘’
1
2 a
2 b
3 a
3 b
4 a
4 b
2-24
647837 M1 (A052020) MC 18-2/18-4 D K ST5 S1