Manitou MI 20 D K ST5 S1 - Page 32

32 647852EN-USM1(B-12/2021)
SPECIFICATIONS & DESCRIPTION
Designation Unit Value
4.12.1
Width of fork arms e (mm)
122
4.12.2 Fork arms length
l (mm)
1150
4.13
Fork carriage to DIN 15173 A/B
FEM3A
4.14 Fork carriage width
b3 (mm) 1100
4.15 Ground clearance of mast m1 (mm) 130
4.16 Ground clearance at centre of wheelbase m2 (mm) 200
4.17 Width of aisle for pallet 1000x1200 crossways Ast (mm) 4140
4.18
Width of aisle for pallet 800x1200 lengthways Ast (mm)
4130
4.19
Turning radius (position down/up) Wa (mm)
2460
4.20. Inner turning radius
b13 (mm)
160
Performances
Table 20. Performances
Designation Unit Value
5.1 Travelling speed laden
km/h
18
5.1.1
Travelling speed unladen 2WD / 4WD km/h
18.5
5.2 Lifting speed laden m/s 0.49
5.2.1 Lifting speed unladen m/s 0.52
5.3 Lowering speed laden
m/s 0.43
5.3.1 Lowering speed unladen
m/s
0.48
5.4 Nominal towing power laden N 19500
5.4.1 Nominal towing power unladen N 13800
5.5
Gradeability laden % >20
5.5.1 Gradeability unladen % >20
5.6 Acceleration time laden
s -
5.7
Service brake
Hydraulic
Motors
Table 21. Motors
Designation Unit Value
6.1 Engine manufacture / type Kubota V2607-CR-E5B
6.2 Engine power acc. To ISO 1585
KW 37.4
6.3 Rated speed
tr/min 2400
6.4
No. Of cylinders / displacement
cm3
4/2615
6.5 Fuel consumption acc. To VDI cycle
L/h
4.55
2.