66 647852EN-USM1(B-12/2021)
MAINTENANCE
4.2. OPENING THE ENGINE
COVER
On the cab version, open the side doors, the side
half-doors and the rear sliding window before
lifting the engine cover.
If the machine is equipped with mini-levers,
retract the armrest.
• Lifting the engine cover
1. Turn counterclockwise the key (1).
Figure 35: Key in engine cover lock
2. Push the button on the lock.
3. Keep the button pushed in and gently lift the
engine cover until the gas strut safety catch (2)
locks in place.
Figure 36: Gas strut safety catch
• Lowering the engine cover
1. Release the safety catch (2) and gently lower
the engine cover.
2. Check that the engine cover is properly closed.
4.3. ORIGINAL MANITOU
SPARE PARTS AND
EQUIPMENT
4.3.1 ORIGINAL MANITOU SPARE
PARTS AND EQUIPMENT
Our lift trucks must be serviced using original Manitou
parts.
4.3.2 BY ALLOWING THE USE OF
NON-ORIGINAL MANITOU PARTS,
YOU RISK
The use of counterfeit parts or components
not approved by the Manufacturer, means
you lose the benefit of the contractual
guarantee
• Legally - to be held responsible in the event of an
accident.
• Technically - to cause operating malfunctions or
shorten the life of the lift truck.
4.3.3 BY USING ORIGINAL MANITOU
PARTS FOR MAINTENANCE
OPERATIONS, YOU BENEFIT FROM
OUR KNOW-HOW
Through its network, MANITOU provides the user with
the following,
• Know-how and competence.
• The guarantee of high-quality work.
• Original replacement parts.
• Help with preventive maintenance.
• Efficient help with diagnosis.
• Improvements due to experience feedback.
• Operator training.
• Only the MANITOU network has detailed
knowledge of the design of the lift truck and
therefore the best technical ability to provide
maintenance.
Original replacement parts are distributed
exclusively by Manitou and its dealer
network. The dealer network list is
available on the Manitou web site: www.
manitou.com
4.
To Next Page
Loading...
Need help?
General
