MAINTENANCE
4.
75647852EN-USM1(B-12/2021)
4. Remove dipstick (3).
5. Wipe the dipstick and check the correct level
between the MINI and MAXI marks.
6. If necessary, add oil through the filler port (4).
7. Visually check that there is no leakage or seepage
of oil from the transmission.
4.8.2 CHECK DIFFERENTIAL OIL
LEVEL
Place the lift truck on level ground with the
engine stopped.
1. Remove level plug (1). The oil should be flush with
the edge of the hole.
2. If necessary, add oil through the same hole.
3. Replace and tighten the level plug (1).
4.8.3 CLEAN RADIATOR CORE
NOTICE
In a polluting atmosphere, clean the radiator core every day.
Do not use a water jet or high-pressure steam as this could
damage the radiator fins.
1. Raise the engine cover
In order to prevent the radiator becoming
clogged, clean it with a compressed air jet
directed from inside to outside. This is the only
effective way of removing the impurities.
To Next Page
Loading...
