62 647852EN-USM1(B-12/2021)
MACHINE OPERATION
WARNING
Ensure that the platform is of sufficient size and load
capacity for transporting the machine. Check also the
allowable ground contact pressure of the platform relative to
the machine.
• Loading the machine
1. Block the wheels of the platform.
2. Attach the loading ramps to the platform in such
a way as to give the shallowest possible ramp
angle for the machine.
3. Load the machine parallel to the platform.
4. Stop the machine.
• Unloading the machine
1. Block the wheels of the platform.
2. Attach the loading ramps to the platform in such
a way as to give the shallowest possible ramp
angle for the machine.
3. Power up the machine.
4. Unload the machine parallel to the platform.
3.5.3 TYING DOWN THE MACHINE
WARNING
Risk of machine falling during transport
Stow the machine onto the semi-trailer with sufficiently
strong ropes.
1. Fix the chocks to the platform at the front and at the
back of each tyre.
2. Also fix the chocks to the platform on the inside of
each tyre.
3. Stow the machine onto the semi-trailer with
sufficiently strong ropes to the front by passing
above the articulation fittings (1) of the mast and to
the back onto the towing pin (2).
4. Tighten the ropes.
3.
To Next Page
Loading...
