• DOK-DIAX02-DDS02.1*ANA-ANW1-EN-E1,44 • 12.96
127
12. Glossary
Special measuring device on servo motors to detect the rotor position
and measure the rotor speed (cyclically absolute position sensing).
Microprocessor
A microprocessor that achieves a high signal processing speed due to
parallel signal conditioning.
Singleturn absolute encoder
Position encoder that supplies an absolute position information signal
within one revolution.
Module in the drive controller containing the operating software and the
drive parameters.
Peak current that the drive controller can supply in 300 ms overload
operation mode.
Interface for high-resolution position measurement using a gear encoder
or a high-resolution main spindle position encoder.
Status display
Two-character indicator on the drive controller displaying the instantane-
ous operating status and error messages.
Servo feedback
Signal conditioner
Software module (DSM)
Peak current,
drive controller
Gear encoder interface
Status indicator
Singleturn encoder
To Next Page
Loading...