Mannesmann Rexroth DDS 2.1 - Saving Data

• DOK-DIAX02-DDS02.1*ANA-ANW1-EN-E1,44 • 12.96
94
8. Final commissioning work
Saving data
on a personal computer
8.4. Saving data
Saving data using
the "specific axis data list"
The "specific axis data list" is intended as an additional data saving option
for axis-related parameter contents and should be stored in the machine
file. This list is to be completed by commissioning personnel on initial
start-up.
If necessary, the blank "specific axis data list" can be photocopied for
documenting the parameter contents of other axes. The form is included
in the appendix to this documentation.
The procedure for saving axis-related parameter contents with a per-
sonal computer is described in Section 5.2.