MARS COMMERCE GSW2 PLUS 1000 - Page 22

GSW2 PLUS EXT
INSTALLATION MANUAL
Page 22
8.5.6 TSTT parameter
TSTT parameter is used to define reference point for sending test message. If this parameter is set
than after restart of the GSW2 PLUS first test SMS will be send out at time defined with TSTT
parameter.
Parameter values are defined in hours.
Example:
To receive first test SMS at 20.00h TSTT value must be set to 20
NOTE
By setting TSTT=0 this function is disabled
8.5.7 MNF parameter
When it is necessary to fix the GSM network to one provider the user can use the MNF parameter.
The MNF parameter switches automatic network searching to manual.
Example:
MCC/MNC code for Simobil is 29340, Mobitel is 29341, TIM is 22201, and Vodafone
Italy is 22210.
More information about national MCC/MNC codes can be acquired at:
http://en.wikipedia.org/wiki/Mobile_Network_Code
8.5.8 MIC parameter
MIC parameter is used to change sound level of the microphone.
8.5.9 SPK parameter
SPK parameter is used to change sound level of the speaker.
8.5.10 MUT parameter
MUT parameter is used to mutate the speaker sound while initiating voice connection.
8.5.11 ARST parameter
ARST parameter defines periodic of auto restart time (in hours) of the GSW2 PLUS device.