Page 23
8.5.12 ADF parameter
Parameter is used to define voice refresh function, to prevent blocking of SIM in some GSM
networks.
If this function is enabled GSW2 PLUS device will make voice call to TN1 number.
8.5.13 LNG parameter
LNG parameter switches between the pre-programmed languages:
0 - English
1 - Italian
2 - Slovenian
3 - Croatian
4 - Dutch
5 - German
6 - Spanish
8.5.14 BUZ parameter
Parameter is used to control buzzer functionality on GSW2 PLUS. Buzzer is used to audio support
some events on GSW2 PLUS.
8.5.15 REG parameter
REG parameter is used to define time out (in seconds) for how long can GSW2 PLUS drop out of
registration before GSM module will be restarted.
This is a very useful function in unstable GSM networks.
8.5.16 LED parameter
LED parameter enables you to turn indication LEDs on GSW2 PLUS ON or OFF (0 – led OFF, 1 –
led ON)
To Next Page
