4
115
Instruments and Controls
right side area (see “Instrument Cluster
Overview” and “Controls to Set and
Configure the Instrument Cluster). The
filling of the dynamic sectors indicates
the current pedal position.
If the user press accelerator pedal and
brake pedal at the same time, the bars
will show both gas and brake sectors
filled.
When the signal is not available, the
graphic shall be greyed-out.
In the WET drive mode or in full map
view only the brake and gas positions
is displayed in dynamic arc sectors (see
example in picture).
Boost and Torque
“Gauges” is a content that can be
displayed on the right side contents area
(see “Controls to Set and Configure the
Instrument Cluster” in this section).
Instantaneous turbo boost pressure
(BOOST) and engine torque (TORQUE)
are represented in the manner indicated
for “Pedals”.
In WET drive mode or in full map view
only, if the signal is not available, the
value of the related items is replaced
with dashes (“- -“).
G-Meter Display (GT, SPORT and
CORSA drive mode only)
“G-Meter” is a content that can be
displayed on the right side contents area
(see “Controls to Set and Configure the
Instrument Cluster” in this section).
G-Meter – GT and SPORT Mode
The red dot represents current
acceleration, its contrail shows the
accelerations history.
The color of the circle changes
according to the acceleration value (see
examples in picture).
When the acceleration is included inside
the first level the circle is dark red
colored and no warning or peak value
are displayed (Stage 1).
When the acceleration is included inside
the second level the circle is white
colored (Stage 2), while when the
To Next Page
Loading...
