Masimo LiDCO - Additional Settings; Manual Entry

Masimo LiDCO Chapter 3: Setting Up
www.masimo.com 24 Masimo
Additional Settings
Allows user to choose the display as absolute value or the index value for the following parameters:
Cardiac Output (CO), Stroke Volume (SV), Systemic Vascular Resistance (SVR), Oxygen Delivery (DO
2
),
Oxygen Consumption (VO
2
). Only CO has the option to display both the absolute value and Index value.
Parameter
Default Setting
Selectable Settings
CO
Absolute
Absolute, Index or both
SV
Absolute
Absolute or Index
SVR
Absolute
Absolute or Index
DO
2
Absolute
Absolute or Index
VO
2
Absolute
Absolute or Index
Manual Entry
Allows user to choose whether the following parameters are measured via pulse oximetry or manually
entered . If manual entry is selected, enter value for selected parameter and touch OK. The date and
time of last update will display.
Parameter
Default Setting
Selectable Settings
Hb
Manual
Pulse Ox or Manual
Hb unit of measure
g/dL
g/dL, mmol/L, g/L
SpO
2
Manual
Pulse Ox or Manual
SvO
2
Disable
Disable or Manual
CVP
Default
Default or Manual
Reminder interval
30 min
Off, or 30 min, 1, 2, and 3 hour
Manual Entry Reminder displays when remainder time is 0. "Use current" uses the existing values and
does not update the timestamp. “Configure” takes user to the manual entry menu where new values can
be entered. Any saved change in value would update the timestamp.
When the source for both Hb and SpO2 is Pulse Ox DO
2
and DO
2
i are calculated and are noted as
cDO
2
/cDO
2
i.