Masimo LiDCO - Product Description; Product Description, Indications, and Contraindications

www.masimo.com 7 Masimo
Product Description, Indications, and
Contraindications
Product Description
Masimo LiDCO
®
is a module that supports minimally invasive hemodynamic measurements that are used
to derive stroke volume and heart rate from a patient’s existing arterial pressure waveform using the
LiDCO
®
algorithm.
The LiDCO algorithm calculates a number of derived parameters from the blood pressure waveform,
including the following:
 Systolic Blood Pressure (Sys)
 Mean Arterial Blood Pressure (MAP)
 Diastolic Blood Pressure (Dia)
 Oxygen Delivery (DO
2
)
 Oxygen Delivery Index (DO
2
i)
 Oxygen Consumption (VO
2
)
 Oxygen Consumption Index (VO
2
i)
 Cardiac Output (CO)
 Cardiac Index (Ci)
 Stroke Volume (SV)
 Stroke Volume Index (SVi)
 Heart Rate (HR)
 Heart Rate Variation (HRV)
 Systemic Vascular Resistance (SVR)
 Systemic Vascular Resistance Index (SVRi)
 Stroke Volume Variation % (SVV)
 Pulse Pressure Variation % (PPV)
 Body Surface Area (BSA)
Masimo LiDCO gets arterial blood pressure data from the analog output of a 3
rd
party patient monitor
(using the Analog Cable), or an interconnect between a 3
rd
party patient monitor and pressure transducer
(using the BP Module Cable). Masimo LiDCO is intended for adult patients requiring cardiovascular
monitoring who have peripheral arterial pressure monitoring in hospital and hospital-type settings.
The operator controls the unit using menus and dedicated buttons on the monitor to select various
display options.
Masimo LiDCO should not be used as the sole basis for diagnosis or therapy.