158
CHAPTER 7: PART REPLACEMENT INSTRUCTIONS
7.1 TESTING THE UNIT
ONCE THE UNIT OR REPLACEMENT PART*** IS FULLY INSTALLED AND ASSEMBLED
AND PROPERLY PLACED ON THE FLOOR, USE THE FOLLOWING INSTRUCTIONS TO
TEST THE MACHINE:
***NOTE - Not all of the replacement instructions will apply to every model.
1) Check that the weight stack pin will slide freely into the weight stack at all positions.
2) Check that the incremental weight pin is tight and moves freely.
3) Check that the cable is tight and properly routed.
4) Check that the seat moves freely and that the seat spring assists the user to move the seat into a higher position.
5) Check all adjustment handles for function.
6) Check that the arms on the unit are even.
7) Check that the repetition counter is active and working properly.
To Next Page
Loading...
Need help?
General
