Matrix G7 Strenght - Chapter 2: Important Safety Instructions; 2.1 Important Safety Information; 2.2 Check for Damaged Parts

2
CHAPTER 2: IMPORTANT SAFETY INSTRUCTIONS
2.1 IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of Matrix Fitness
Systems products to instruct all individuals, whether they are
the end user or supervising personnel on proper usage of the
equipment.
PROPER USAGE:
Do not use any equipment in any way other than designed or
intended by the manufacturer. It is imperative that Matrix Fitness
Systems equipment be used properly to avoid injury.
Keep hands and feet clear at all times from moving parts to avoid
injury.
WARNING: Serious injury can occur on this
equipment. Follow these precautions to avoid
injuries.
1) Never allow children on selectorized strength equipment.
Teenagers must be supervised at all times while using this
equipment.
2) All warnings and instructions should be read and proper
instruction obtained prior to use.
3) Cease exercise if you feel faint or dizzy. Obtain a medical exam
before beginning an exercise program.
4) Keep body, hair, clothing, and fitness accessories free and clear
of all moving parts.
5) Inspect the machine before use. DO NOT use the machine if it
appears damaged or inoperable.
6) Check to see that the selector pin is completely inserted into the
weight stack.
7) NEVER use the machine with the weight stack pinned in an
elevated position.
8) Never use dumbbells or other means to incrementally increase
the weight resistance. Only use the means provided directly from
the manufacturer.
9) This equipment should only be used in supervised areas where
access and control are regulated by the owner.
2.2 CHECK FOR DAMAGED PARTS
1) DO NOT use any equipment that is damaged and or has worn
or broken parts. Use only replacement parts supplied by Matrix
Fitness Systems or your local Matrix Fitness Systems dealer.
2) MAINTAIN LABELS AND NAMEPLATES: Do not remove
labels for any reason. They contain important information. If
unreadable or missing, contract Matrix Fitness Systems for a
replacement.
3) SECURE EQUIPMENT: All equipment must be secured to the
floor to stabilize and eliminate rocking or tipping over. This must be
performed by a licensed contractor.
4) MAINTAIN ALL EQUIPMENT: Preventative maintenance is
the key to smoothly operating equipment as well as keeping your
liability to a minimum. Equipment needs to be inspected at regular
intervals.
5) Ensure that any person(s) making adjustments or performing
maintenance or repair of any kind is qualified to do so. Matrix
Fitness Systems will provide service and maintenance training at
our corporate facility upon request.