3
Preventative maintenance and daily cleaning will prolong the life and look of your Matrix Fitness Systems equipment.
3.1 PREVENTATIVE MAINTENANCE CHECKLIST
CHAPTER 3: PREVENTATIVE MAINTENANCE
ACTION FREQUENCY
Clean Upholstery Daily
Inspect Cables Daily
Clean Guide Rods Monthly
Inspect Hardware Monthly
Inspect Frame Bi-Annually
Clean Machine As Needed
Clean Grips As Needed
Clean Linear Bearing Guide Rods (Calf Press and Leg Press only) As Needed
Lubricate Linear Bearings (Calf Press and Leg Press only) As Needed or every 1.5 million cycles.
Lubricate Guide Rods As Needed
Upholstery and grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should
be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rod.
Linear bearings should be lubricated with a SKF LGMT 2 grease.
To Next Page
Need help?
General
