Page 10 of 54 5100054 BND01O03.docx
5.2. Transport and Storage
• Temperature: -25 °C to 70 °C
• Relative humidity: 10% to 95% no condensation
• Air pressure: 50 kPa to 106 kPa
6. Standards
CE SYMBOL
With this symbol, MAVIG declares that the products comply with
the regulations in the applicable EU directives.
UL APPROVED COMPONENTS
These components have been recognized by Underwriters
Laboratories Inc.. Representative spot checks have been
performed by UL and meet the relevant requirements.
With this symbol, MAVIG declares that the products comply with the regulations in the
applicable EU directives. The CE symbol on the label indicates conformity.
The products fulfill as partly completed machinery all relevant provisions of the EU-
Directive 2006/42/EC on machinery. MAVIG is EN ISO 13485:2016 certified.
7. Initial Commissioning
Once the system has been successfully installed in accordance with this manual, the
following must be considered during use:
• Avoid collisions with other devices, the walls, or the ceiling.
• Stop using the system in the event of a collision, or other damages. Do not remain
below the system.
These instructions for use are only valid once the first commissioning has been properly
implemented. The system/device must be thoroughly cleaned and disinfected prior to initial
use (see Instructions for Use BND01Gxx; xx are placeholders for the last revision).
To Next Page
Loading...
