Maxair CAPR - Page 102

Page 102 P/N 03521015 Rev Q
Assembly - ChinStrap to Hard Hat Skirt
A. Grasp one side ChinStrap Hook at its base where the strap attaches.
B. Place tip of the forenger against back of Hook.
C. Press Hook on to Hard Hat Skirt Silver Rivet until it (audible) clicks in
place, securely.
D. Repeat for other ChinStrap Hook on to other side Hard Hat Skirt Rivet.
1. Securely grasp the female buckle in one
hand and the male buckle in the other.
1. Securely grasp the female
buckle in one hand and the male
buckle in the other.
A
C
B
A. Grasp one side ChinStrap Hook base between thumb and
forenger.
B. Using force from the thumb, push Hook o󰀨 Hard Hat Skirt
Rivet.
C. Repeat for other ChinStrap Hook on other Helmet side.
A
B
Dis-Assembly - ChinStrap o󰀨 of Hard Hat Skirt
Assembly - Connect ChinStrap Buckle
Dis-Assembly - Dis-Connect ChinStrap Buckle
3. Press the buckles together until the audible
click indicates they are securely connected.
2. Insert the male buckle
into the female buckle.
3. Pull the female and male buckle halves apart.2. Depress the spring locks on
the female buckle with the
thumb and forenger.
Adjust the ChinStrap Length
1. Disconnect the buckle and place the
male buckle at right angle to the straps.
2. Shorten: Hold the male buckle rmly in one
hand, grasp the non-Hook strap-end and pull.
3. Lengthen: Hold the male buckle rmly in one
hand, grasp the Hook strap-end and pull.