Maxair CAPR - HE Hood with Heavy Loading Filter (HLF); CAPR 2270-06 HE Hood Standard System Configuration

Page 85 P/N 03521015 Rev Q
21. HE Hood with Heavy Loading Filter (HLF)
O.N. 2270-06SM*
(07831038)
Small-Medium
O.N. 2270-06ML*
(07831039)
Medium-Large
*one 2170-26 (07831040) HLF is
included with each Hood
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
System or component, be sure to be
familiar with the system’s NIOSH approved conguration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unt for safe and e󰀨ective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User’s Instructions should use this product.
Failure to follow the User’s Instructions, these and in the MAXAIR
Systems User’s Instructions, P/N 03521015, may be hazardous to
the user’s health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to regula-
tory requirements. Bio-Medical Devices Intl, Inc. does not recom-
mend the appropriate systems for a particular institution or facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open ame.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
!
Symbol Denitions
Warning, Caution, or Note Fluid Resistance
Order Number Part Number
!
O.N. PN
Intended Use
The MAXAIR
®
Hood Systems are intended to lter aerosolized and
droplet particulates and provide high level uid resistance.
Hoods are designed for single use applications.
For Use With
The MAXAIR 2270-06 HE Hood is a component of the
MAXAIR Hood Systems and provides optimum performance when
donned with a MAXAIR Systems CAPR 2082-03 Helmet or,
alternatively, with a MAXAIR Systems 2026-03 Helmet.
CAPR 2270-06 HE Hood Standard System
Conguration (showing alternate Helmets, 1 or 2)
1. 2082-03 Helmet w/ Power Cord
and Chin Bar
5. 2500-36TSC Battery
2. 2026-03 Helmet w/Power Cord
and ChinBar
6. 2600-01 Charger
3. 2367-02 Quick Cu󰀨 7. 2270-06 HE Hood
4. 2000-76 Battery Belt 8. 2170-26 Heavy Loading Filter
* The 2500-30TSC 16-20 hour/charge battery is an alternate that
may be used in place of the 2500-36TSC.
Materials
MATERIAL TYPE FLUID RESISTANCE*
Body (Shroud) Polypropylene Level 4 compatible
(seams included)
Lens Polycarbonate Level 4 compatible
Filter Polypropylene Level 3 compatible
HLF Polypropylene/
modacrylic blend
General purpose uid
absorption and large
particle lter.
* Internal test data demonstrates material compatibility with the liquid
barrier performance classication levels described in ANSI/AAMI PB70:2012
for isolation gowns, etc. Seams between non-like material are excluded.
Specications
Temperature Limits: 49
0
C
APF = 25
Regulatory
NIOSH
2
4
1
5
7
3
6
8