Maxair CAPR - Approved System Configuration Components

Page 13 P/N 03521015 Rev Q
Refer to the regulatory approval inserts shipped with your systems, and the following NIOSH website addresses for MAXAIR
CAPR regulatory approval status.
http://www2a.cdc.gov/drds/cel/cel_results.asp?startrecord=1&Search=cel_form&maxrecords=50&manufacturer=BMD&appdatefrom=&appdate
to=&powered=&scbatype=&scbause=&privatelabel=
http://www.cdc.gov/niosh/npptl/topics/respirators/disp_part/PAPRtables.html
Table 2. summarizes current components that may be used to congure systems relative to the applicable Approval Body.
CUFF AND SHROUD CONFIGURATIONS
ITEM
NUMBER
DESCRIPTION
CARTRIDGE FILTER
NIOSH CE
2164-10
HE
(01031327)
2163-10
XP
(01031279)
2167-10
XP
(01031569)
2166-10
XP
(01031593)
2081-03
(P/Ns
03531001,
03531021,
01031269,
2590-05)
Helmet with Cage
w/o Cage w/o Cage w/o Cage
 
2083-03
(P/Ns
03531001,
03531148,
01031269,
2590-05)
Helmet with Cage and HH Liner
w/o Cage w/o Cage w/o Cage

2071-01
(03531021)
Helmet Liner (Standard)
    
2071-03
(03531148)
Helmet Liner (Hard Hat)
 
2061-08
(01031284)
Filter Cover Cap (FCC)
    
2061-04A
(01031528)
Hard Hat
 
2400-090L
(03521128)
Impact Lens
 
2365-02ML
(01031272)
DLC Lens-Cu󰀨, Medium-Large
    
2365-02SM
(01031316)
DLC Lens-Cu󰀨, Small
    
2366-02ML
(01031555)
DLC Lens-Cu󰀨, Medium-Large, HH
 
2366-02SM
(01031556)
DLC Lens-Cu󰀨, Small, HH
 
3.2 Approved System Conguration Components
Table 2. Approved System Components
BATTERY CHOICE(S)
PER
FILTER CHOICE
(01532104)
2500-
36TSC 36TSC
 
(01532161) 37TSC 37TSC

(01532116) 30TSC 30TSC 30TSC 30TSC
 