Maxair CAPR - XP DLC Pre-Filter Hood; Standard CAPR 2270-01 DLC Pre-Filter Hood System

Page 76 P/N 03521015 Rev Q
Intended Use
The MAXAIR
®
CAPR
®
XP DLC Hood Systems are intended to lter
aerosolized and droplet particulates.
Hoods are designed for single use applications.
For Use With
The MAXAIR 2270-03 XP DLC Pre-Filter Hood is a component of
the MAXAIR CAPR Hood Systems and is intended to be donned
with a MAXAIR CAPR Powered Air Purifying Respirator (PAPR)
2080-03 Helmet and a 2165-10 Filter Cartridge.
Standard CAPR 2270-01 DLC Pre-Filter Hood
System
1. 2080-03 Helmet with
Power Cord
4. 2000-76 Battery Belt
2. 2165-10 Filter Cartridge 5. 2600-01 Battery Charger
3. 2500-30TSC Battery,
large
6. 2270-03 XP Hood
Materials
DLC Lens is PETG
DLC Cu󰀨 is Polyurethane
Hood body is plastic coated fabric
Filter is electrostatic lter material
Specications
Temperature Limits: 49
0
C
Eciency Rang: APF = 1,000
Regulatory
NIOSH
18. XP DLC Pre-Filter Hood
WARNING
Use only if package is received unopened and contents
are undamaged. If damage is noted, contact the shipper for
replacement or repair.
Prior to using any MAXAIR
®
System or component, be sure to
be familiar with the system’s NIOSH approved conguration.
Read and understand the User’s Instructions Manual.
Failure to follow the User’s Instructions Manual may be
hazardous to the user’s health.
The institution using this product in any application is
responsible for determining the appropriateness of this
equipment relative to regulatory requirements. Bio-Medical
Devices Intl, Inc. does not recommend the appropriate
systems for a particular institution or facility.
DO NOT use if any component is damaged. If any
components are damaged or contaminated and therefore
unt for safe and e󰀨ective use, they should be replaced
immediately.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
The shrouds are not intended for use against oily particulates
such as paint mist, oil mist or detergents.
NOT for use in atmospheres immediately dangerous to life or
health (IDLH), and atmospheres containing less than 19.5%
oxygen.
Follow current local regulations governing biohazard waste to
safely dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at
1-800-443-3842.
O.N. 2270-03SM
(01031315)
Small-Medium
O.N. 2270-03ML
(01031521)
Medium-Large
1
2
3
4
5
6