Maxair CAPR - 25 Chinstrap

Page 101 P/N 03521015 Rev Q
Typical Hard Hat System Components
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replace-
ment or repair.
Prior to using any MAXAIR
®
System or component, be sure to be
familiar with the system’s NIOSH approved conguration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unt for safe and e󰀨ective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User’s Instructions should use this product.
Failure to follow the User’s Instructions, these and in the MAXAIR
Systems User’s Instructions, P/N 03521015, may be hazardous to
the user’s health.
The institution using this product in any application is responsible
for determining the appropriateness of this equipment relative to
regulatory requirements. Bio-Medical Devices Intl, Inc. does not
recommend the appropriate systems for a particular institution or
facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
!
Symbol Denitions
Warning, Caution, or Note
Order Number Part Number
!
O.N. P/N
Intended Use
The MAXAIR Chin Strap is an accessory item for MAXAIR Hard
Hat congurations that enhances Helmet-to-head secureness of
t. This may be helpful for applications where a worker’s activity or
environmental factors could otherwise dislodge the Hard Hat from
its properly donned position.
For Use With
The Chin Strap may be used with any MAXAIR Hard Hat System
conguration.
1 2
43
Specications
Temperature Limits: 49
0
C
Materials
Nylon Hooks
Acetal Buckle and Keeper
Polypropylene Strap
Polyester Buckle
Regulatory
NIOSH
ANSI Z87.1
O.N. 2000-208
P/N 03531235
Accessories
1. 2073-03 Hard Hat Helmet w/
Liner and Power Cord
3. 2000-76 Battery Belt
2. 2500-30TSC Li-Ion
Battery (16-20 Hr/Charge)
4. 2600-01 Battery Charger
2167-10
XP Filter
Cartridge
2264-01 ML & SM
DLC Shroud
2366-01 ML & SM
DLC Lens-Cu󰀨
NOTE
The 2500-36TSC is an alternate battery.
!
25. ChinStrap