Maxair CAPR - Disposable Lens Cuff (DLC); Standard CA-CAPR-36 System with 2365-02 DLC

Page 59 P/N 03521015 Rev Q
WARNING
Use only if package is received unopened and contents
are undamaged. If damage is noted, contact the shipper for
replacement or repair.
Prior to using any MAXAIR
®
System or component, be sure
to be familiar with the system’s NIOSH approved congura-
tion.
Read and understand the User’s Instructions Manual.
Failure to follow the User’s Instructions Manual may be
hazardous to the user’s health.
The institution using this product in any application is
responsible for determining the appropriateness of this
equipment relative to regulatory requirements. Bio-Medical
Devices Intl, Inc. does not recommend the appropriate
systems for a particular institution or facility.
DO NOT use if any component is damaged. If any com-
ponents are damaged or contaminated and therefore unt
for safe and e󰀨ective use, they should be replaced imme-
diately.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
The DLCs are not intended for use against oily particulates
such as paint mist, oil mist or detergents.
NOT for use in atmospheres immediately dangerous to life
or health (IDLH), and atmospheres containing less than
19.5% oxygen.
Follow current local regulations governing biohazard waste
to safely dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at
1-800-443-3842.
14. Disposable Lens Cuff (DLC)
Intended Use
The MAXAIR
®
CAPR
®
DLC (Disposable Lens Cu󰀨) Systems
are intended to lter aerosolized and droplet particulates.
DLCs are designed for single use applications.
For Use With
The MAXAIR 2365-02 DLC is a component of the
MAXAIR CAPR Systems and is intended to be donned with a
MAXAIR CAPR Powered Air Purifying Respirator (PAPR)
2081-03 Helmet and a 2164-10 Filter Cartridge or alternate.
Standard CA-CAPR-36 System with 2365-02 DLC
1. 2070-01 Liner (included
with 2081-03 Helmet)
5. 2500-36TSC Battery*
2. 2081-03 Helmet and
Power Cord (2081-03
Helmet with SnapOn
Cage removed)
6. 2600-01 Battery Charger
3. 2164-10 Filter Car-
tridge*
7. 2000-76 Battery Belt
4. 2061-03 Filter Cover
Cap
8. 2365-02 DLC
* Alternate Filter Cartridges include the 2163-10, 2166-10, and
2167-10.
Alternate Batteries include the 2500-37TSC and 2500-30TSC.
Materials
DLC Lens is PETG
DLC Cu󰀨 is Polyurethane
Specications
Temperature Limits: 49
0
C
E󰀩ciency Rating: HE
Regulatory
CE Mark
NIOSH
1 5
6
8
4
32
7
O.N. 2365-02SM
(01031316)
Small-Medium
O.N. 2365-02ML
(01031291)
Medium-Large