Maxair CAPR - DLC Shroud; Standard CA-CAPR-36 System with 2260-05 DLC Shroud

Page 67 P/N 03521015 Rev Q
Standard CA-CAPR-36 System with 2260-05 DLC
Shroud
1. 2081-03 Helmet and Power Cord
(2081-03 Helmet with SnapOn
Cage removed)
5. 2500-36TSC Battery*
2. 2164-10 Filter Cartridge* 6. 2600-01 Battery Charger
3. 2061-03 Filter Cover Cap 7. 2260-05 DLC Shroud
4. 2000-76 Battery Belt
* Alternate Filter Cartridges include the 2163-10.
Alternate Batteries include the 2500-37TSC and 2500-30TSC.
Materials
5DLC Lens is PETG
DLC Cu󰀨 is Polyurethane
Shroud body is Polypropylene
Specications
Temperature Limits: 49
0
C
Eciency Rang: HE
Regulatory
NIOSH
Intended Use
The MAXAIR
®
CAPR
®
Shroud Systems are intended to lter
aerosolized and droplet particulates.
Shrouds are designed for single use applications.
For Use With
The MAXAIR 2260-05 DLC-Shroud is a component of the
MAXAIR CAPR Shroud Systems and is intended to be donned with a
MAXAIR CAPR Powered Air Purifying Respirator (PAPR)
2081-03 Helmet and a 2164-10 Filter Cartridge or alternate.
v
WARNING
Use only if package is received unopened and contents
are undamaged. If damage is noted, contact the shipper for
replacement or repair.
Prior to using any MAXAIR
®
System or component, be sure
to be familiar with the system’s NIOSH approved congura-
tion.
Read and understand the User’s Instructions Manual.
Failure to follow the User’s Instructions Manual may be
hazardous to the user’s health.
The institution using this product in any application is re-
sponsible for determining the appropriateness of this equip-
ment relative to regulatory requirements. Bio-Medical De-
vices Intl, Inc. does not recommend the appropriate systems
for a particular institution or facility.
DO NOT use if any component is damaged. If any compo-
nents are damaged or contaminated and therefore unt for
safe and e󰀨ective use, they should be replaced immediately.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
The DLCs are not intended for use against oily particulates
such as paint mist, oil mist or detergents.
NOT for use in atmospheres immediately dangerous to life
or health (IDLH), and atmospheres containing less than
19.5% oxygen.
Follow current local regulations governing biohazard waste
to safely dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at
1-800-443-3842.
15. DLC Shroud
O.N. 2260-05SM
(01031345)
Small-Medium
O.N. 2260-05ML
(01031434)
Medium-Large
1
5
6
4
3
2
7