Maxair CAPR - Standard System Components and Order and Part Numbers

Page 27 P/N 03521015 Rev Q
The MAXAIR
®
Systems CAPR
®
Systems are multi-application air-purifying, Li-Ion Battery powered particulate respirators that
optimize user safety, convenience, ease-of-use, and cost e󰀨ectiveness.
The CAPR loose tting Powered Air Purifying Respirator (PAPR) System congurations are for ltering aerosolized and droplet
particulates from otherwise breathable air.
ITEM O.N. NIOSH P/N DESCRIPTION
1 2081-03
A
03531001
03531021
01031269
2590-05
Helmet Assembly,
consisting of -
Helmet
Liner
Cage
Power Cord
2 2051-07
A,B
01031269 Cage (SnapOn)
3 2071-01
A
03531021 Liner
4 2590-05
A
2590-05 Power Cord
5 2500-36TSC
C
01532104 Li-Ion Battery
6 2000-76 2000-76 Battery Belt
7 2600-01 01432089 Li-Ion Battery Charger
A Each 2081-03 Helmet ships with a 2071-01 Helmet Liner, 2051-07 Cage, and 2590-05 Power Cord assembled to the helmet.
B The Cage provides shipping protection and is used with Hood Congurations. For Shroud and Cu󰀨 congurations the Cage is
removed and replaced with an appropriate Filter Cartridge.
C Alternate Batteries, 2500-37TSC and 2500-30TSC, are available.
3.5 Standard System Components and Order and Part Numbers
1
7
6
5
432