Maxair CAPR - Quick Cuff

Page 83 P/N 03521015 Rev Q
20. Quick Cuff
For Use With
The MAXAIR 2367-02 Quick Cu󰀨 is a component of the
MAXAIR Hood Systems used with the 2082-03 and 2026-03 Helmets.
MAXAIR 2367-02 Quick
Front View Inside View
Materials
Cu󰀨 is polypropylene/polypropylene spunbonded & latex free elastic
Specications
Temperature Limits: 49
0
C
Regulatory
NIOSH
NOTE
The Quick Cu󰀨 is used with the 2270-06 Hood and
alternately with the 2082-03 or the 2026-03 Helmet.
O.N. 2367-02
(07631022)
WARNING
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
System or component, be sure to be
familiar with the system’s NIOSH approved conguration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unt for safe and e󰀨ective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and under-
stand the User’s Instructions should use this product.
Failure to follow the User’s Instructions, these and in the MAXAIR
Systems User’s Instructions, P/N 03521015, may be hazardous to
the user’s health.
The institution using this product in any application is responsible for
determining the appropriateness of this equipment relative to regula-
tory requirements. Bio-Medical Devices Intl, Inc. does not recom-
mend the appropriate systems for a particular institution or facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open ame.
Follow current local regulations governing biohazard waste to safely
dispose of used shrouds.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
!
Symbol Denitions
Warning, Caution, or Note
Order Number Part Number
!
O.N. PN
!
2082-03 Helmet 2026-03 Helmet