Maxair CAPR - Default Chapter; Table of Contents

Page 4 P/N 03521015 Rev Q
Table Of Contents
1. Warnings, Cautions, Notes, Symbols 7
1.1 Important Information 7
1.2 S- Special or Critical User’s Instructions 8
1.3 SYMBOLS – General and Packaging 9
2. Regulatory Marking Denitions 10
2.1 Marking Denitions 10
3. Introduction 11
3.1 Part Numbers Reference 11
3.2 Approved System Conguration Components 13
3.3 CAPR Systems 17
3.3.1 Systems and System Components 17
3.3.2 Systems Conguration Possibilities (Trees) 19
3.4. Applicability of Earlier Version Components and Assemblies 25
3.4.1 Filter Cover Cap (FCC), 2061-08 (01031284) 25
3.4.2 Lithium-Ion Batteries (LIBS) - 2500-36TSC (01532104) and 2500-30TSC (01532116) 26
3.5 Standard System Components and Order and Part Numbers 27
3.6 Helmets 28
3.6.1 Common Helmet And Liner Characteristics 28
3.6.2 Helmet Assemblies 29
3.6.3 Characteristics Details (Refer to pages 20-21) 30
3.6.4 Helmet Symbol Denitions 32
3.7 2365-02SM/ML (01031291, 01031316) Overview 32
3.8 Battery, Belt, and Charger Overview 33
4. Unpacking Standard System Components and Parts
Identication 34
4.1 Unpacking the 2081-03 ( 03531001, 03531021, 01031269, 2590-05)CAPR Helmet 34
4.2 Unpacking the 2500-36TSC (01532104) Battery 35
4.3 Unpacking the 2000-76 Battery Belt 36
4.4 Unpacking the 2600-01 (01432089) Battery Charger 37
4.5 Unpacking 2365-02SM (01031316) and 2365-02ML (01031291) DLC (Disposable Lens Cu󰀨) 38
5. Standard System Set Up 40
5.1 Components Check List 40
5.2 Setting Up 40
5.3 Assemble and Disassemble Components 40
5.4 Inspections 41
5.5 Warning Device: Yellow LED Air Flow Indicator Check - Bou󰀨ant Cap Method 41
5.6 Warning Device: Yellow LED Air Flow Indicator Check - Tape Method 43
6. Standard System Donning and Do󰀩ng 44
7. Comfort Strips 48
8. Li-Ion Battery 49
9. Charger 50
10. Helmet 53
11. Helmet Liner 54